Liner cutting system for cutting and laser deburring of flexible metal hoses

Technical data and special features
  • Installation location: China
  • System dimensions: 7.6 x 3.4 m
  • Assembly part dimensions:
    Hose 38 - 102 mm diameter;
    Hose length 60 - 230 mm (compressed);
    Wall thickness 1.3 - 1.9 mm
  • Cycle time: 18 sec.
  • Automatic stations: 4
  • Workers: 1
  • Installation immediately after the cutting saw, downstream of the coiling system
  • The cutting saw cuts hoses for the magazine to a length of 7 m (30 min. autonomy)
  • The system retrieves pieces of hose from the magazine
  • Two laser stations tack the layers of sheet metal to the left and right of the cutting edge provided
  • The laser then cuts the hose between the tack welds
  • Finished pieces of hose are placed on a belt and transported away
Stephan Eckert
Your contact for Liner cutting system for cutting and laser deburring of flexible metal hoses
Stephan Eckert
+49 75 44 502-230